The ice block producing machine was created with higher technology than various
other refrigeration equipment. Ambient temperatures should not go beyond 35°C
and the installing place should be well ventilated. Therefore, how specifically
to prolong the program lifestyle? Let's see some advice on daily maintenance of
the ice block maker below.
Firstly, it must be installed a long way away
from heat source, and at the same time, this ice maker cannot be directly shone
simply by the sun. The working environment, daily maintenance and fix, both of
these elements have great impact on machine's service lifestyle and ice
producing effect.
When doesn't use ice block building machine for a long
period, the machine ought to be cleaned and dried just before storing. The gap
of back again along with sides of it will a minimum of 30 cm from the wall, as
the top component should a minimum of 60cm. The ice block making machine ought
to be devote a ventilated and dried out place, don't be put on view
air.
The water found in the ice maker machine should adhere to state
normal water standards and water filtration gadget should be installed to be
able to filter impurities in water, or the pumps, clean sink and ice mold could
be blocked by these impurities.
Sweep dust in the condenser surface area
every 8 weeks. After short-distance transportation, it must be rest for 2-6
hours before working.
Turn off the energy when washing the ice block
building machine, strictly prohibit clean with drinking water pipe directly at
your body of the gear and clean with acidic, alkaline and other aggressive
washing solvents, neutral detergent is preferred.
Water supply hose ought
to be opened every 8 weeks to clean the filtration system inlet valve, so avoid
intake infarction that due to sand or various other impurities.
Handle
carefully when carrying the ice block building machine and violent shock ought
to be prevented, carrying slope should a minimum of 45 degree. Make use of
vacuum, small brush to completely clean these devices, strictly prohibit use
sharpened metal tools.
Clean the drinking water pipe, sink, ice storage
space box every 8 weeks.
Then you should focus on the gap of
installing.
Ice block maker machine should use different power supply,
special energy source loops, fuse protector, anticreeping switch, most of these
ought to be grounded firmly.
